CURRENT TS-590SG FIRMWARE VERSION

 TS-590SG

Current
Firmware Version

Released

v1.04

17 November 2016

NOTE: This firmware is for the TS-590SG, not the TS-590S.

Before updating the firmware, save the data using the latest version of the Radio Control Program ARCP-590G (Ver.1.03) and write the data back after updating the firmware.

Also, remember to save all the radio’s settings: TS-590S Firmware Q & A 

Download the firmware installation instructions from:

http://www.kenwood.com/i/products/info/amateur/ts_590g/ts590g_update_e.html

Download the firmware from:

http://www.kenwood.com/i/products/info/amateur/ts_590g/pdf/TS-590G_V104E.zip

TS-590SG Firmware update information

Updated item : (Version 1.03 1.04) [November 17, 2016]

 

Revises the following symptom.

 

1.

The internal antenna tuner may not work correctly under certain conditions.

  

 

Which version is installed in the radio?

There are three methods of finding out which firmware version is installed in your TS-590SG.

Method #1

***    Turn the radio OFF at the front-panel ON/OFF button.

***    While holding in the M.IN button, turn the radio ON again at the front panel ON/OFF button.

***    The currently installed firmware version is displayed on the front panel.

***    Release the M.IN button.

***   Turn the radio OFF and ON again to resume normal operation.

Method #2

***      Start ARCP-590G.

***    Connect to the radio in the usual way.

***    Click on “Help > About” to see the currently installed firmware version.

Method #3

***    Turn the radio ON at the front-panel ON/OFF button.

***    Select Menu #00.

BACK TO TS-590SG INDEX PAGE